PS-10

10mm carbon SMD potentiometer

The PS-10 SMD potentiometer offers control where frequent adjustment is required. The shaftless design allows for employment of different engagement mechanisms, such as a customized shaft, a motor control or a human interface adjustment. This potentiometer can also control variable outputs including frequency, change in motor speed or volume

  ■  Up to 10.000 life cycles
  ■  IP54 protection
  ■  Embossed tape packaging according to IEC 60286-3:2007
  ■  Wiper positioned at initial, 50% or fully clockwise
  ■  Self extinguishable plastic (UL 94V-0) available
  ■  Up to 16 mechanical detents for tactile feedback
  ■  Locating pins for accurate PCB positioning
  ■  Low torque version available
  ■  Shafts and knobs






KEY FEATURES



SPECIFICATIONS

Taper¹ Linear
Range of values¹ 1KΩ ≤ Rn ≤ 1MΩ
Max. Voltage 200 VDC
Nominal power 0.15 W @ 50°C (122°F)
Residual resistance¹ ≤ 0.5% Rn (5Ω min.)
Equivalent noise resistance ≤ 3% Rn (3Ω min.)
Operating temperature¹ -40°C to +85°C
(-13°F to + 158°F)

1 Others available on request

Mechanical rotation angle 235° ± 5°
Electrical rotation angle 220° ± 20°
Torque Rotational: 0.4 to 2 Ncm (0.6 to 2.7 in-oz)
Stop: > 5 Ncm (>7 in-oz)
Life1 Up to 10k cycles

1 Others check availability

Test method (CEI 393-1) ΔR(%)- typical test results
Electrical life 1.000h at 50°C; 0.15W ±10%
Mechanical life 1000 cycles at 10 to 15 cpm ±10%
Temperature coefficient -40°C; +85°C
-25°C; +70°C 		±1.500 ppm/°C
±1.000 ppm/°C
Thermal cycling 16h at 90°C and 2h at -40°C ±5%
Damp heat 500h at 40°C and 95% relative humidity (RH) ±15%
Vibration 2h each plane at 10Hz - 55Hz ±3%
Storage 6 months at 23°C ±2°C and 50% RH ±5%

Out of range values may not comply with these results. Standard test conditions: temperature:23°C ±2°C and 45% to 70% RH



APPLICATION EXAMPLES



DOWNLOADS



CONFIGURATOR











    ⓘ Please note that optional features limit the probability for directly available inventory











    Configure

    /- rotors:rotors -/ /- mouting:mouting -/ /- resistive-value:resistive-value -/ /- tolerance:tolerance -/ /- life-cycle:life-cycle -/ /- stop-positions:stop-positions -/ /- flammability:flammability -/ /- wiper-position:wiper-position -/ /- torque:torque -/ /- packaging:packaging -/ /$ %torque% () $/ /$ %leadsmaterial% (-S) $/ /$ %rotorshaftcolor% () $/ /@ stop-positions:-PAM; torque("Low") @/ /@ stop-positions:-P1I; torque("Low") @/ /@ stop-positions:-P1F; torque("Low") @/ /@ stop-positions:-P02; torque("Low") @/ /@ stop-positions:-P03; torque("Low") @/ /@ stop-positions:-P04; torque("Low") @/ /@ stop-positions:-P05; torque("Low") @/ /@ stop-positions:-P06; torque("Low") @/ /@ stop-positions:-P07; torque("Low") @/ /@ stop-positions:-P08; torque("Low") @/ /@ stop-positions:-P09; torque("Low") @/ /@ stop-positions:-P10; torque("Low") @/ /@ stop-positions:-P11; torque("Low") @/ /@ stop-positions:-P12; torque("Low") @/ /@ stop-positions:-P13; torque("Low") @/ /@ stop-positions:-P14; torque("Low") @/ /@ stop-positions:-P15; torque("Low") @/ /@ stop-positions:-P16; torque("Low") @/ /? life-cycle:Extra Long; ; (-L) %torque% ?/ /@ life-cycle:Extra Long; torque("Standard") @/ /@ life-cycle:Long; torque("Standard") @/ /@ life-cycle:Extra Long; torque("Select") @/ /@ life-cycle:U; torque("Standard") @/ /@ life-cycle:U; torque("Low") @/ /? rotors:B; () %rotorshaftcolor% ?/ /? rotors:K; () %rotorshaftcolor% ?/ /? rotors:L; () %rotorshaftcolor% ?/ /? rotors:M; () %rotorshaftcolor% ?/ /? rotors:R; () %rotorshaftcolor% ?/ /? rotors:G; () %rotorshaftcolor% ?/ /@ rotors:G; rotor-shaft-color("Select" "Natural" "Orange" "Black" "Blue" "Brown" "Cream" "Green" "Grey" "Red" "White" "Yellow") @/ /@ mouting:H40; flammability("Non-Flammable") @/ /% PS10*rotors**mouting*-*resistive-value*A*tolerance**life-cycle**stop-positions**packaging**flammability**wiper-position**torque* %/

    RELATED PRODUCTS